Os-engines 91HZ-R 3D Manuale Utente Scaricare il pdf (Pagina 11)

ABOUT THE PLUMBING

Carry out plumbing referring to a sketch on page 21.

Connect silicone tubing cut into approx. 10cm to the

nipple on the cover plate.

Then, connect the check valve supplied with the

engine as sketched (Be aware of the direction.) It is

suggested to install a stopper as shown in the sketch.

When refueling, remove this stopper to release

pressure in the fuel tank.

Connect the fuel line to the nipple on the regulator.

Be sure to equip a commercially available in-line filter

to avoid dust entering the regulator.

Note:

Since the muffler pressurized fuel feed is not used

with this engine, plug a nipple on the muffler or

replace it with a bolt.

Fuel tank

Fuel Stopper

(commercially available)

Fuel Filter

(commercially available)

Check valve

Fuel Stopper

(commercially available)

T Nipple

Remove when refuelling

(commercially

available)

Be aware of direction

Grooved part should

face the fuel tank.

Silicone tubing

approx.10cm

(commercially

available)

JAPAN

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 24 25

Nessun commento

Os-engines 91HZ-R 3D Manuale Utente Pagina 11